Courtyard House: My Wife is Xu Huizhen

Page 703

After all, there is no patent law in mainland China, and there is no formal diplomatic relationship between mainland China and the United States. Personnel exchanges between the two sides are basically in a relatively closed and isolated state.

Therefore, even if he secretly transferred the technology, Milo Moreno would have no way of knowing the inside story.

After several years of accumulation and careful preparation, we can fully carry out in-depth research and development work on this basis.

By then, even if Milo Moreno had the keen eye to see, he probably wouldn't be able to tell that the technology actually originated from him.

“Great! In my opinion, this matter should be foolproof. I will contact my uncle immediately tonight.”

It's worth noting that Milo Moreno's uncle is the undisputed major shareholder of that company, and the Moreno Company is actually an enterprise controlled by their entire family.

Although Milo Moreno holds a relatively small number of shares, he still wields considerable influence within the company.

"Then I'll be eagerly awaiting the good news you bring."

After that, the two first discussed and drafted a general framework for cooperation.

Immediately afterwards, He Yuzhu asked Milo Moreno to arrange for five lathes of different specifications to be delivered to his company.

After everything was settled, the two of them slowly walked out of the shop.

He Yuzhu glanced at his watch and saw that the hands were already pointing towards afternoon tea time.

So, without hesitation, he drove straight to a quiet tea restaurant.

Seeing this, Huang Zhirou, sitting in the passenger seat, asked with a suspicious look:

Why not just go back to the company?

However, faced with her question, He Yuzhu did not offer much explanation, but simply smiled and said:

"Just follow me, and you'll find out soon enough."

After the car came to a steady stop, He Yuzhu first went around to the other side, then gently opened the car door and, in a very gentlemanly and polite manner, reached out to hold Huang Zhirou's hand and carefully helped her out of the car.

Surprisingly, He Yuzhu never let go of that gentle little hand from beginning to end.

Huang Zhirou tried to pull her hand out of He Yuzhu's grasp with a little force, but she was unsuccessful.

A blush instantly spread across her fair cheeks, and she walked into the elegant tea restaurant, slightly shyly led by He Yuzhu.

The two walked through the hall and went straight into a quiet private room.

Surprisingly, after they sat down, He Yuzhu still held Huang Zhirou's soft and slender hand tightly and refused to let go.

While ordering, He Yuzhu asked softly:

"Honey, what would you like to eat?"

Huang Zhirou lowered her head slightly and said in a voice as soft as a mosquito's buzz:

"I just hope I won't be 'harassed' by you anymore, boss!"

These words not only made He Yuzhu feel a little embarrassed, but even the young waitress who had just entered the room couldn't help but smirk.

However, the well-trained waitress quickly suppressed her smile, forced herself to remain calm, and put on a serious expression.

Seeing this, He Yuzhu coughed twice to cover up his embarrassment, and then finally slowly let go of Huang Zhirou's small hand.

He casually took the elegant menu handed to him by the waitress and ordered a few delicate pastries and a pot of fragrant black tea.

After ordering, he handed the menu to Huang Zhirou next to him.

Huang Zhirou first thanked them politely, and then carefully looked through the menu.

Before long, she had ordered several dishes she liked, and after thanking the waitress again, she handed the menu back to her.

After the waitress left the room, Huang Zhirou raised her head, her gaze as gentle as water as she looked at He Yuzhu opposite her, and asked curiously:

"Boss, why did you suddenly decide to get involved in the OEM business?"

Upon hearing this question, He Yuzhu smiled slightly and countered with:

Is there anything wrong with doing OEM manufacturing?

Huang Zhirou pondered for a moment, then carefully chose her words to answer:

"It's not that I think OEM is bad. It's just that I've never heard of this business model before. And as far as I know, the profit margin for OEM business is relatively low."

That's absolutely true! The level of expertise isn't particularly high, but I know perfectly well that in the CNC machine tool field alone, they already have a very mature technological system and a complete sales network. If I were to start thinking about entering this industry now, beginning from scratch, it would be incredibly difficult!

Look at the present, I haven't even completely mastered the technology to produce transistors yet, and I don't even know who to buy them from.

Even if you're lucky enough to buy the relevant technology in time and successfully produce it, by the time you turn around and start studying CNC lathes, it'll be too late, and you'll definitely be left far behind by your competitors.

So, after much thought, it seems like we should start with contract manufacturing. After all, that way we can easily obtain ready-made production technology from Milo Moreno's company.

This approach can significantly reduce the time I spent on independent research and development in the early stages.

Wouldn't it be much more efficient to digest and absorb their technology first, and then use it as a foundation for innovation?

I have thought this through very clearly! Next, I plan to first submit this technology to the top leader for review, and then try to contact universities in mainland China and start cooperation.

Let those professionals work diligently in the research directions specified by He Yuzhu. Once they achieve results, we can immediately put them into practical application.

As long as we rely closely on the strong research capabilities of numerous universities in mainland China, we will naturally be able to continuously produce new technologies, thus ensuring our invincibility in market competition!

It's not just about CNC lathes; we can also turn our attention to other home appliances like radios and televisions and conduct in-depth research on them!

He Yuzhu patiently and concisely explained to Huang Zhirou, but he skillfully avoided mentioning matters related to the mainland.

Before this, Huang Zhirou had never thought so far ahead; she was only concerned that the profits from contract manufacturing were not substantial.

However, after listening to He Yuzhu's detailed explanation, she suddenly understood, as if struck by a thunderbolt:

"Wow, this is truly a wonderful way to acquire advanced technology!"

Just then, the beautiful waitress smiled and brought over delicate pastries and fragrant black tea. They then leisurely began to savor the delicious food, exchanging unique insights and perspectives on various matters.

After enjoying a delightful afternoon tea, the two returned to the company together.

To everyone's delight, the five brand-new CNC lathes have been successfully delivered to the company!

Immediately afterwards, the workers who came to provide on-site service quickly and efficiently completed the assembly of these lathes. Among them, an experienced technician stayed behind to tirelessly teach the company's workers how to operate and use these advanced machines correctly and skillfully.

In the following two days, through continuous learning and practice, and with the careful guidance of technicians, a large number of qualified operators emerged like bamboo shoots after a spring rain.

Throughout the entire process, even the well-informed He Yuzhu himself was amazed!

You should know that parts that used to require skilled workers with intermediate professional titles to manufacture can now be easily operated and produced by ordinary front-line workers!

It has to be said that the remarkable advantages shown by this CNC lathe are truly amazing!

It saves the long time spent training workers, while at the same time greatly improving work efficiency.

The most significant advantage of CNC lathes lies in their ability to achieve high-efficiency mass production, with products being manufactured continuously, like an uninterrupted assembly line, thus greatly saving valuable time. Their efficiency is an astonishing 10 times or even more than that of traditional lathes!

"Wow, I never knew it could be this fast!"

He Yuzhu, who witnessed all of this, couldn't help but widen his eyes and secretly regretted it, sighing that he should have known about and adopted this kind of CNC lathe earlier.

After the technicians who came for training left one after another, He Yuzhu, unable to contain his curiosity, quickly walked to the CNC lathe and carefully disassembled the cover plate of the CNC center.

Inside, numerous printed circuit boards were visible, arranged closely together, and densely covered with tiny transistors.

It's worth noting that such a seemingly ordinary lathe would cost several thousand yuan if sold in the Hong Kong market.

However, once equipped with advanced transistor CNC technology, its price instantly soars to a staggering HK$15000 or even HK$10,000 or 20,000! In other words, just by adding these transistor CNC devices, the added value of this lathe reaches more than HK$10,000.

It's not hard to imagine just how lucrative the profits could be!

After carefully observing the components, He Yuzhu did not make any rash moves to touch any parts, but instead carefully repackaged all the parts as they were originally.

He then turned and went back to his office, quickly summoned Huang Zhirou, and said:

"Go get me 10 sets of radio parts and a set of tools," He Yuzhu instructed Huang Zhirou.

Upon hearing this, Huang Zhirou looked up in surprise, her eyes wide, and asked, "Boss, what do you need these things for?"

Looking at her curious expression, He Yuzhu chuckled and asked, "What's wrong? You're starting to meddle in my business now?"

When Huang Zhirou was asked this question, she blushed and said coquettishly, "Who...who cares about you!" After saying that, she turned around and hurriedly walked out of the office.

A few minutes later, Huang Zhirou returned, carrying a large paper bag. She gently placed the bag on the desk to the side, then stood aside and quietly watched He Yuzhu.

He Yuzhu opened the paper bag and took out a soldering iron, rosin solder, insulating pad, radio printed circuit board, and a large number of transistor parts, etc.

It turns out that their company had a radio assembly project that had been ongoing, but He Yuzhu had never personally operated it before.

However, today, He Yuzhu suddenly had a novel idea – he wanted to see if he could awaken some new skills by soldering a radio by hand.

As for Huang Zhirou, she was completely baffled and couldn't understand what had gotten into her boss today, that she would suddenly decide to tinker with something like soldering a radio.

However, since the boss had already spoken, she couldn't say anything more and could only watch silently from the side.

Meanwhile, He Yuzhu was completely immersed in his own world.

Referring to the circuit diagram, he carefully and precisely soldered each tiny transistor onto the printed circuit board.

After soldering the first radio and making some minor adjustments, the expected system notification did not occur.

He Yuzhu was not discouraged and began to make the second radio. When the second radio was completed, a system message appeared in front of He Yuzhu.

Chapter 493 Hiring a Senior Management Personnel

You have successfully mastered a new professional skill—Electronic Circuit Engineer Soldering—currently at level 1.