N-A-A Page 893
Page 893
On this well-adjusted lathe, even low-level workers can produce precision parts that were originally only produced by experienced senior workers.
As a result, the production efficiency of the entire vehicle factory has been greatly improved. Production tasks that originally required a lot of manpower and a long time to complete can now be completed quickly and with high quality with the help of CNC lathes, injecting strong impetus into the development of the vehicle factory.
In just a few months, the vehicle factory has been completely transformed, a sea change compared to its former appearance. The old and dilapidated appearance of the factory is gone, replaced by a brand new look.
He Yuzhu, standing nearby, gazed into the workshop, witnessing a scene of orderly production. Brand-new, advanced equipment hummed efficiently, emitting a rhythmic, powerful hum that seemed to play a stirring symphony of production. Workers moved about, each bustling with activity, yet organized and methodical, each fully focused on the task at hand.
He Yuzhu looked at all this and a satisfied smile unconsciously appeared on his face. That smile was full of satisfaction with the development and changes in the factory.
However, amidst this positive situation, a problem still lingered that caused He Yuzhu some concern. Although production efficiency had improved significantly, the production lines in the workshop were still continuously producing the traditional 212 Jeeps.
In He Yuzhu's view, the market is constantly changing and consumer demands are becoming increasingly diverse. It is unlikely that this old model will be able to maintain its foothold in the highly competitive market for a long time.
But he also knew that the factory director Wang Yifeng was also facing many difficult problems in the operation of the vehicle factory, such as shortage of funds, lack of technical talents, and difficulty in upgrading equipment.
Thinking of this, He Yuzhu quietly hid his dissatisfaction with the single car model in his heart, and did not express this emotion directly during his daily communication with Wang Yifeng.
In fact, the current 212 Jeep differs significantly from the historical version in many ways.
Chapter 649
The R&D team invested significant effort, utilizing advanced technologies to deeply optimize the engine's combustion efficiency. From the structural design of the combustion chamber to the precise tuning of the fuel injectors, every detail was meticulously considered and tested.
At the same time, the vehicle's transmission system has also been comprehensively improved, with carefully selected suitable gear materials and optimized gear ratios to make power transmission smoother and more efficient.
These efforts have resulted in the current 212 Jeep being extremely fuel-efficient, with significantly reduced fuel consumption for the same mileage compared to previous versions, saving owners a considerable amount of money.
Not only that, the vehicle's suspension system adopts a newly designed multi-link independent suspension, which can adaptively adjust the shock absorption force according to different road conditions, greatly improving driving comfort. Even when driving on rugged roads, it can effectively filter out bumps.
The braking system has introduced advanced anti-lock braking system (ABS) and electronic brake-force distribution system (EBD), which significantly shortens the braking distance. It provides reliable safety protection for the driver whether at high speed or in emergency braking situations, and the driving experience and safety have achieved a qualitative leap.
However, when compared with mainstream international models, the 212 Jeep's engine reveals some limitations. In terms of power output, its maximum power and torque figures are not as impressive as those of similar international models, and its acceleration performance is slightly inferior.
In terms of the key indicator of fuel economy, although it performs well among similar domestic vehicles, it is only average compared with the international advanced level and fails to show a clear advantage.
In a highly competitive international market, the engine performance of the 212 Jeep makes it less competitive and less likely to attract consumers who seek high performance and efficiency.
After the tour, He Yuzhu walked back to the office slowly, as if he was still immersed in the bustling tour experience in the workshop.
He gently closed the office door to isolate himself from the outside noise, then walked steadily to his desk and slowly sat down.
After a brief rest, he carefully pulled a thick stack of documents from his bag. These documents had been painstakingly collected over many years of traveling throughout southern China. They contained crucial information on advanced mechanical technology, as well as his unique suggestions for improving these technologies based on actual domestic production conditions.
He Yuzhu holds a deep bond with both the machinery plant and the vehicle plant, a bond as deep as blood. After all, he oversaw the creation of both factories from desolate wasteland. From site selection and planning to equipment procurement and personnel training, he has devoted countless efforts to their development and growth.
Even before going to Hong Kong, He Yuzhu had keenly recognized the importance of technical intelligence and began engaging in intelligence gathering. However, his intelligence gathering was fundamentally different from traditional, shady espionage activities. He didn't obtain information through illicit means such as stealing secrets or covert surveillance; instead, he spent a significant amount of time each day carefully reading various domestic and international newspapers and periodicals. He meticulously studied every word of any report related to the machinery industry, then categorized, organized, and summarized them.
Through such efforts day after day and year after year, He Yuzhu is able to fully understand the development trends and current status of various industries.
This time, the materials he meticulously compiled focused on the machinery industry, particularly vehicles, with his detailed plan for Jeep modification occupying a considerable amount of space.
Looking back, when he first arrived in Hong Kong, he was full of enthusiasm and lofty ambitions, eager to immediately devote himself to the production of the 212 Jeep and hoped to make a name for himself in this fertile commercial land.
To gain a comprehensive and in-depth understanding of the market, he conducted a series of meticulous research. He roamed the streets of Hong Kong, personally distributing questionnaires and patiently asking passersby about their opinions and needs for cars. He also actively communicated with major auto dealers, gaining first-hand information and valuable experience from them.
However, as the research progressed, the cruel reality was like a bucket of cold water, ruthlessly extinguishing his initial enthusiasm.
An investigation revealed that the 212 Jeep suffered from several significant shortcomings in the Hong Kong market, rendering it virtually uncompetitive. First, its high fuel consumption, a significant disadvantage for consumers in Hong Kong, where fuel prices are already high, meant owners would face higher future vehicle costs.
Secondly, the noise problem is quite prominent during the driving process. The roar of the engine and the vibration of the body parts greatly affect the comfort experience of the driver and passengers, making the journey that should have been pleasant become noisy.
Furthermore, the 212 Jeep's boxy exterior design ran counter to the fashionable, sleek aesthetic favored by Southeast Asian consumers. In an era where individuality and aesthetics are paramount, such a somewhat rigid design struggled to attract local consumers.
In addition, the interior design of the vehicle is also extremely simple. The seats are made of very ordinary materials, which can easily cause discomfort when riding for a long time. The interior decoration is extremely simple, with almost no elements that can demonstrate taste and luxury.
For ordinary Hong Kong people who live in bustling cities and have high demands for quality of life, such a vehicle that is unsatisfactory in appearance, performance, interior and other aspects is really difficult to arouse their interest, let alone make them willingly pay for it.
After countless days and nights of deliberation and careful consideration, faced with such a severe market situation, he finally had to make the difficult decision to abandon the production of 212.
However, there is always a way out, and He Yuzhu was not discouraged. He knew that in this challenging era, it was meaningless to just sink into oblivion. Only by actively seeking change could he find a way out.
Leveraging his keen business acumen, honed over many years in the industry, He Yuzhu re-examined the market and sought a new path, turning his attention to lathes. While the lathe industry at the time was fiercely competitive, it also held hidden opportunities, particularly in the manufacturing of basic components, where market demand was robust but underserved.
He Yuzhu did not hesitate and plunged into the research of lathe technology. He inquired about the news of industry experts and traveled tirelessly across the country just to communicate and learn from these senior predecessors.
Every time he visited an expert, he soaked up every opportunity to learn, like a sponge. He inquired in detail about key technical points and process details, and listened attentively to the experiences and insights they shared. Returning home, he dove into a sea of books, poring over technical materials day and night. Those obscure technical terms and complex drawings became, in his eyes, the secret to success.
For countless days and nights, his room was always brightly lit. He was immersed in the ocean of knowledge, constantly absorbing nutrients and improving his understanding of lathe technology.
After years of unremitting efforts, He Yuzhu finally reaped the rewards. He successfully manufactured a variety of hardware and automotive parts. From material selection to processing, every step of the process was meticulously crafted.
To ensure quality, he strictly controls the procurement of raw materials and only uses the highest quality steel; during the processing, he repeatedly adjusts the lathe parameters, striving for perfection in every dimension and every detail.
Surprisingly, these highly versatile parts, thanks to their excellent quality and reasonable price, have taken off like a duck in water once they were released into the market. They not only meet the daily production and maintenance needs of many companies, but also have won unanimous praise from customers for their excellent cost-effectiveness. They are very popular in the market, with impressive sales, and have opened up a new era for He Yuzhu's business.
Although He Yuzhu's plan to acquire advanced automotive technology was thwarted and he returned empty-handed, his inner desire for technological advancement was as raging as a fire and had not diminished in the slightest.
With his exceptional ingenuity, he decided to tap into internal potential and, building on existing technologies, launched a series of meticulous and pragmatic improvements. He thoroughly researched the material properties of components and, through repeated testing and comparison, carefully selected the most suitable materials to enhance their performance and durability. Regarding production processes, he immersing himself in the workshop, meticulously observing every step and engaging with frontline workers. He continuously optimized processes, successfully shortening production cycles and reducing defective product rates, achieving remarkable interim results.
When returning to China this time, He Yuzhu's suitcase was filled with precious technical information, which was the result of his hard work during this period.
Moreover, with the inspiration he had accumulated along the way, he also managed to overcome a long-standing thorny problem that had plagued the domestic automotive industry—a comprehensive upgrade and transformation of the classic 212 model, injecting new vitality into the development of the domestic automotive industry.
As the factory director, Wang Yifeng is very adept in administrative management, but he is not from a technical background.
At this moment, I am faced with this highly professional technical problem report.
The dense data and complex and obscure charts made him feel overwhelmed.
He frowned, and beads of sweat appeared on his forehead.
He paced back and forth in the slightly cramped office, his leather shoes making a dull sound as they hit the ground.
The anxiety in my heart surged like a tide, and every step I took felt heavy.
I tried to search my mind for a solution, but I had no idea.
After some hard thought, the factory director frowned and a hint of anxiety appeared in his eyes.
But his years of management experience made him calm down quickly, and he made a prompt decision to keep He Yuzhu in the factory.
He knew that this matter was urgent, so he quickly picked up the phone.
Dial the numbers of technical section chiefs, workshop directors and other professionals one by one.
He urgently invited them to gather in the conference room to discuss countermeasures.
Soon, everyone sat around the slightly old conference table.
The chandelier above their heads cast a dim light, illuminating everyone's serious face.
The technical chief spoke first, eloquently expounding on his initial ideas.
The pencil in his hand quickly wrote down the key points in the notebook.
The workshop director frowned and interrupted the technical chief from time to time.
Raise your own questions and opinions.
For a moment, the conference room was filled with people talking at once, various opinions collided fiercely, and the atmosphere was extremely warm.
However, as time passed, everyone became increasingly confused and their faces turned red.
But I have never been able to find a solution to the current problem.
A sense of oppression gradually filled the conference room.
He Yuzhu seemed to be driven by an invisible force and was full of energy.
He plunged into the workshop where machines roared, and spent every day with the cold machines.
The environment in the workshop was terrible and the noisy machines were deafening, but he was completely unaware of it.
When he was hungry, he took out some dry food from his pocket and swallowed it in big gulps, enjoying the rough taste.
When I was thirsty, I picked up the kettle beside me, tilted my head back and took a few gulps of cold water, letting the coolness slide down my throat.
In this difficult environment, he completely ignored everything in the outside world and devoted himself to his work.
In this way, he worked hard and spent a whole week in the workshop.
Finally, through his tireless efforts, he successfully overcame the challenges of upgrading and transforming 212.
When the last part is in place, the machine makes a smooth and steady sound.
The workshop suddenly erupted in deafening cheers and applause.
The workers gathered around, their faces filled with admiration and joy.
They cheered for He Yuzhu's outstanding performance, and the sound seemed to break through the roof of the workshop and spread far away.
However, just as everyone was immersed in joy, the door of the big leader's office was gently pushed open again, and He Yuzhu came in as summoned.
The big boss sat in front of a large desk, his posture straight and a kind smile on his face.
He gestured to He Yuzhu to sit down.
His eyes were gentle and full of expectation, and he spoke slowly, "Xiao He, the higher-ups have taken the forward-thinking ideas you put forward very seriously. Over the past period of time, the relevant experts and responsible persons have conducted numerous discussions, carefully considering every detail. After countless brainstorming sessions and careful deliberation, they have now agreed in principle to your proposal."
Having said that, the leader paused for a moment, picked up the teacup, took a sip, and moistened his throat.
He went on to say, "This is not just a breakthrough in the field of machinery. The scope of this cooperation will continue to spread like ripples, not only limited to the field of machinery, but also to multiple industries such as electronics, chemicals, and new energy.
This grand plan is of extraordinary significance to the long-term development of our country. It will have a profound impact on many aspects, including the economy and science and technology, and inject strong impetus into the country's modernization drive."